Manufacturers:Precision Metals Ltd.

Division C - Accepted Materials

---

Precision Metals Ltd.
Associate Member (Manufacturer)

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.

Manufacturer: Precision Metals Ltd. Website www.precisionmetals.ca Contact Address See the current Membership list and contact information at www.rcabc.org Country of Origin Canada Country of Manufacture Canada Year First Installed pre-2017 BC: pre-2017 Canada: Pre-2017 Foreign: N/A

Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category

Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.

---

Roof Waterproofing System Materials

Drains

Internal flange-type roof drains

Spun Copper Drain

Spun Aluminum Drain

Spun Copper Drain (Clamping)

Spun Aluminum Drain (Clamping)

Spun Aluminum Deck Drain

External flange-type roof drains

Copper Hot-welded Drain

Scupper and Overflow Drains

Copper Scupper (Open top)

Penetration Flashings

Galvanized Penetration Flashings

Hot-welded B-vent (Flat)

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

Aluminium and Copper Penetration Flashings

Aluminum Stack (Pipe flashing)

Aluminum Stack Cap (Standard)

Aluminum Stack Cap (Anti-vandal)

---

Grade-level Waterproofing Materials

Drains

Penetration Flashings

Galvanized Penetration Flashings

Hot-welded B-vent (Flat)

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

Aluminium and Copper Penetration Flashings

Aluminum Stack (Pipe flashing)

Aluminum Stack Cap (Standard)

Aluminum Stack Cap (Anti-vandal)

---

Water-shedding System Materials

Roofs

Penetration Flashings

Galvanized Penetration Flashings

Hot-welded B-vent (Sloped)

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

Aluminium and Copper Penetration Flashings

Aluminum Stack Flashing (Sloped)

Aluminum Stack Cap (Standard)

Aluminum Stack Cap (Anti-vandal)

---

Accepted Materials

Home

© RCABC 2024
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Accept Terms Of Use

We use cookies to enhance your browsing experience and analyze website traffic. By clicking "Agree" or continuing to browse our website, you consent to the use of cookies and agree to the Roofing Practices Manual Terms Of Use.

Agree