Materials:FleeceBACK RL PVC

Division C - Accepted Materials

---

FleeceBACK RL (RapidLock) PVC
by Carlisle SynTec Systems Canada

Material Acceptance and Product Details The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer http://www.carlislesyntec.com Accepted for the RoofStar Guarantee Program October 20, 2023 Accepted for application in Roof Waterproofing Systems Acceptance Criteria N/A Product Summary Carlisle's RapidLock (RL) fleece-backed PVC membrane is internally reinforced and must be installed over their proprietary insulation panels, SecurShield RapidLock Polyiso and SecurShield RapidLock HD Polyiso. Both panels are manufactured with a VELCRO® Brand Securable Solutions facer on the upper side of the panel, to which the membrane is attached. Available thickness (nominal): 2.92 mm (115 mil) (adapted from the Technical Data Sheet) Conditions and Limitations Carlisle's RapidLock (RL) membranes (EPDM, TPO, and PVC) are accepted by the RGC for use on waterproofing roofs up to 30.48 m (100') above grade (higher roofs require a design review by Carlisle Syntec Systems Canada). Technical Data Sheet Click the "PDF" icon to open the TDS in a new window.

---

Back to Accepted Materials

Home