Difference between revisions of "EPDM Conventionally Insulated System (Alternate)"

Revision as of 15:45, 8 August 2016

1 WORK INCLUDED

(1) Vapour Retarder: If required by design authority.
(2) Insulation: Mechanically attached where deck type permits. Installed according to RoofStar Guarantee Standards. See available insulation products in the Accepted Materials section of this Manual.
(3) Adhesive: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
(4) Single-ply Membrane: Installed according to manufacturer's instructions and RoofStar Guarantee Standards.
(5) Membrane Lap: Thermoset membrane may be joined using uncured tape or proprietary adhesive.
(6) Edge Flashing: Proprietary.
(7) Membrane Flashing: Installed according to manufacturer's instructions.

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Fascia: Optional.
(C) Wood Blocking

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Back to EPDM Application

Back to EPDM Construction Details

Back to Construction Details

@@ Line 4: / Line 4: @@
 === WORK INCLUDED ===
-(1) <b>Vapour Retardant:</b> If required by design authority.
+;(1) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMVAPOUR|'''Vapour Retarder''']]: If required by design authority.
+;(2) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMINSULATION|'''Insulation''']]: Mechanically attached where deck type permits. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
-(2) <b>Insulation: </b>Mechanically attached where deck type permits. Installed according to <i>RGC</i> <i>Guarantee Standard </i>A4.3.<i> </i>See Section 2.2 for accepted materials
+;(3) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMADHESIVE|'''Adhesive''']]: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
+;(4) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMMEMBRANE|'''Single-ply Membrane''']]: Installed according to manufacturer's instructions and ''RoofStar Guarantee Standards''.
-(3) <b>Adhesive: </b>Proprietary, installed according to manufacturer&#8217;s instructions, usually brushed, rolled or sprayed.
+;(5) '''Membrane Lap''': Thermoset membrane may be joined using uncured tape or proprietary adhesive.
+;(6) '''Edge Flashing''': Proprietary.
-(4) <b>Single Ply Membrane:</b> Installed according to manufacturer&#8217;s instructions and <i>RGC</i> <i>Guarantee Standards </i>Section<i> </i>2.1.1 and Section 2.1.3.
+;(7) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMSTRIPPING|'''Membrane Flashing''']]: Installed according to manufacturer's instructions.
-(5) <b>Membrane Lap: </b>Thermoplastic membrane may be welded or chemically bonded (See Section 6.2) Thermoset membrane may be joined using uncured tape or proprietary adhesive (See Section 6.1).
-(6) <b>Edge Flashing:</b> Proprietary.
-(7) <b>Membrane Flashing:</b> Installed according to manufacturer&#8217;s instructions.
+<hr>
 === RELATED WORK BY OTHERS ===
-(A) <b>Acceptable Deck</b>
+;(A) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMDECKS|'''Acceptable Deck''']]
+;(B) '''Fascia''': Optional.
+;(C) [[RoofStar Guarantee Standards for EPDM Roof Systems#EPDMWOODBLOCKING|'''Wood Blocking''']]
-(B) <b>Fascia:</b> Optional.
-(C) <b>Wood Blocking:</b> Equal to height of insulation.
+'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.
-'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
+<hr>
-<hr>