Difference between revisions of "TPO Conventionally Insulated System (Typical)"

Revision as of 21:22, 8 August 2016

1 WORK INCLUDED

1) Gypsum Deck Overlay: May be required depending on insulation thickness or when required as a thermal barrier by design authority.
(2) Insulation: Mechanically attached. Installed according to RoofStar Guarantee Standards. See available insulation products in the Accepted Materials section of this Manual.
(3) Single-ply Membrane: Installed according to manufacturer's instructions and RoofStar Guarantee Standards.
(4) Adhesive: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
(5) Membrane Flashing: Adhered according to manufacturer's printed specifications using proprietary adhesive. Must be carried to outside of parapet or minimum 200 mm (8") above finished roof surface.
(6) Fasteners: Install according to manufacturer's instructions (style may vary depending on material type and manufacturer's specification).
(7) Membrane Lap: TPO/PVC (thermoset) membrane may be joined using uncured tape or proprietary adhesive.
(8) Metal Cap Flashing: As required by the RoofStar Guarantee Standards.

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Acceptable Parapet Surface: Surface must be smooth, dry and clean. Rough surface must be covered with treated plywood, to be determined by design authority or inspector or as required by manufacturer.
(C) Sloped Wood Blocking

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Back to TPO/PVC Application

Back to TPO/PVC Construction Details

Back to Construction Details

@@ Line 3: / Line 3: @@
 === WORK INCLUDED ===
-;1) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness  or when required as a thermal barrier by design authority.
+;1) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness  or when required as a thermal barrier by design authority.
-;(2) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOINSULATION|'''Insulation''']]: Mechanically attached. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
+;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCINSULATION|'''Insulation''']]: Mechanically attached. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
-;(3) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOMEMBRANE|'''Single-ply Membrane''']]: Installed according to manufacturer's instructions and ''RoofStar Guarantee Standards''.
+;(3) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCMEMBRANE|'''Single-ply Membrane''']]: Installed according to manufacturer's instructions and ''RoofStar Guarantee Standards''.
-;(4) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOADHESIVE|'''Adhesive''']]: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
+;(4) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCADHESIVE|'''Adhesive''']]: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
-;(5) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOSTRIPPING|'''Membrane Flashing''']]: Adhered according to manufacturer's printed specifications using proprietary adhesive. Must be carried to outside of parapet or minimum 200 mm (8") above finished roof surface.
+;(5) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCSTRIPPING|'''Membrane Flashing''']]: Adhered according to manufacturer's printed specifications using proprietary adhesive. Must be carried to outside of parapet or minimum 200 mm (8") above finished roof surface.
 ;(6) '''Fasteners''': Install according to manufacturer's instructions (style may vary depending on material type and manufacturer's specification).
-;(7) '''Membrane Lap''': TPO (thermoset) membrane may be joined using uncured tape or proprietary adhesive.
+;(7) '''Membrane Lap''': TPO/PVC (thermoset) membrane may be joined using uncured tape or proprietary adhesive.
-;(8) [[RoofStar Guarantee Standards for TPO Roof Systems#METALCAP-TPO|'''Metal Cap Flashing''']]: As required by the ''RoofStar Guarantee Standards''.
+;(8) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#METALCAP-TPO/PVC|'''Metal Cap Flashing''']]: As required by the ''RoofStar Guarantee Standards''.
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[RoofStar Guarantee Standards for TPO Roof Systems#TPODECKS|'''Acceptable Deck''']]
+;(A) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCDECKS|'''Acceptable Deck''']]
-;(B) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOWALLSUB|'''Acceptable Parapet Surface''']]: Surface must be smooth, dry and clean. Rough surface must be covered with treated plywood, to be determined by design authority or inspector or as required by manufacturer.
+;(B) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCWALLSUB|'''Acceptable Parapet Surface''']]: Surface must be smooth, dry and clean. Rough surface must be covered with treated plywood, to be determined by design authority or inspector or as required by manufacturer.
-;(C) [[RoofStar Guarantee Standards for TPO Roof Systems#TPOWOODBLOCKING|'''Sloped Wood Blocking''']]
+;(C) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPO/PVCWOODBLOCKING|'''Sloped Wood Blocking''']]