Difference between revisions of "ASM Eave and Rake Edges (Snap-Lock Seams)"

Revision as of 16:07, 26 April 2019

RoofStar Guarantee Standards are blue-linked

ASM Details

(1) Ice and Water Protection: Accepted self-adhered modified bituminous membrane.
(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
(3) Metal Panel Clip: Installed to metal roof panel manufacturer's printed instructions.
(4) Architectural Metal Roof Panel
(5) Continuous Metal Cleat
(6) Metal Fascia Flashing
(7) Edge Metal Flashing (Continuous)
(8) Pre-formed Closures
(9) Exposed Fasteners: High-domed gasketed cladding type screws compatible with metal roof panel.
(10) Rake Edge Metal Flashing

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 17:34, 23 October 2017 (view source) James Klassen (talk \| contribs) ← Older edit	Revision as of 16:07, 26 April 2019 (view source) James Klassen (talk \| contribs) m (James Klassen moved page ASM Details:E1.7.4 (Eave & Gable Protection for Proprietary Systems) to ASM 10.1.2 Eave and Rake Flashing (Snap Seam)) Newer edit →
(No difference)