Difference between revisions of "TPO Conventionally Insulated System (Typical)"

Revision as of 19:14, 18 February 2020

RoofStar Guarantee Standards are blue-linked

TPO Details

1 WORK INCLUDED

1) Gypsum Deck Overlay: May be required depending on insulation thickness or when required as a thermal barrier by design authority.
(2) Insulation: Mechanically attached. Installed according to RoofStar Guarantee Standards. See available insulation products in the Accepted Materials section of this Manual.
(3) Single-ply Membrane: Installed according to manufacturer's instructions and RoofStar Guarantee Standards.
(4) Adhesive: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
(5) Membrane Flashing: Adhered according to manufacturer's printed specifications using proprietary adhesive. Must be carried to outside of parapet or minimum 200 mm (8") above finished roof surface.
(6) Fasteners: Install according to manufacturer's instructions (style may vary depending on material type and manufacturer's specification).
(7) Membrane Lap: Thermoplastic membrane may be welded or chemically bonded.
(8) Metal Cap Flashing: As required by the RoofStar Guarantee Standards.

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Acceptable Parapet Surface: Surface must be smooth, dry and clean. Rough surface must be covered with treated plywood, to be determined by design authority or inspector or as required by manufacturer.
(C) Sloped Wood Blocking

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

RoofStar Guarantee Standards for TPO Membrane Systems

Back to TPO Construction Details

Back to Construction Details

@@ Line 3: / Line 3: @@
 |}
 <div class="panel panel-success">
-<div class="panel-heading"><big>'''TPO/PVC Details'''</big></div>
+<div class="panel-heading"><big>'''TPO Details'''</big></div>
 <div class="panel-body">
 <div class="col-md-6">
@@ Line 13: / Line 13: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;1) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness  or when required as a thermal barrier by design authority.
+;1) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOSUBSTRATES|'''Gypsum Deck Overlay''']]: May be required depending on insulation thickness  or when required as a thermal barrier by design authority.
-;(2) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOINSULATION|'''Insulation''']]: Mechanically attached. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
+;(2) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOINSULATION|'''Insulation''']]: Mechanically attached. Installed according to ''RoofStar Guarantee Standards''. See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
-;(3) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOMEMBRANE|'''Single-ply Membrane''']]: Installed according to manufacturer's instructions and ''RoofStar Guarantee Standards''.
+;(3) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOMEMBRANE|'''Single-ply Membrane''']]: Installed according to manufacturer's instructions and ''RoofStar Guarantee Standards''.
-;(4) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOADHESIVE|'''Adhesive''']]: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
+;(4) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOADHESIVE|'''Adhesive''']]: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
-;(5) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#TPOSTRIPPING|'''Membrane Flashing''']]: Adhered according to manufacturer's printed specifications using proprietary adhesive. Must be carried to outside of parapet or minimum 200 mm (8") above finished roof surface.
+;(5) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOSTRIPPING|'''Membrane Flashing''']]: Adhered according to manufacturer's printed specifications using proprietary adhesive. Must be carried to outside of parapet or minimum 200 mm (8") above finished roof surface.
 ;(6) '''Fasteners''': Install according to manufacturer's instructions (style may vary depending on material type and manufacturer's specification).
 ;(7) '''Membrane Lap''': Thermoplastic membrane may be welded or chemically bonded.
-;(8) [[RoofStar Guarantee Standards for TPO/PVC Roof Assemblies#METALCAP-TPO|'''Metal Cap Flashing''']]: As required by the ''RoofStar Guarantee Standards''.
+;(8) [[RoofStar Guarantee Standards for TPO Membrane Systems#METALCAP-TPO|'''Metal Cap Flashing''']]: As required by the ''RoofStar Guarantee Standards''.
 <hr>
 === RELATED WORK BY OTHERS ===
-;(A) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPODECKS|'''Acceptable Deck''']]
+;(A) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPODECKS|'''Acceptable Deck''']]
-;(B) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPOWALLSUB|'''Acceptable Parapet Surface''']]: Surface must be smooth, dry and clean. Rough surface must be covered with treated plywood, to be determined by design authority or inspector or as required by manufacturer.
+;(B) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOWALLSUB|'''Acceptable Parapet Surface''']]: Surface must be smooth, dry and clean. Rough surface must be covered with treated plywood, to be determined by design authority or inspector or as required by manufacturer.
-;(C) [[RoofStar Guarantee Standards for TPO/PVC Roof Systems#TPOWOODBLOCKING|'''Sloped Wood Blocking''']]
+;(C) [[RoofStar Guarantee Standards for TPO Membrane Systems#TPOWOODBLOCKING|'''Sloped Wood Blocking''']]
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->