Difference between revisions of "EPDM Conventionally Insulated System (Alternate)"

Revision as of 19:45, 18 February 2020

RoofStar Guarantee Standards are blue-linked

EPDM Details

(1) Vapour Retarder: If required by design authority.
(2) Insulation: Mechanically attached where deck type permits. Installed according to RoofStar Guarantee Standards. See available insulation products in the Accepted Materials section of this Manual.
(3) Adhesive: Proprietary, installed according to manufacturer's instructions, usually brushed, rolled or sprayed.
(4) Single-ply Membrane: Installed according to manufacturer's instructions and RoofStar Guarantee Standards.
(5) Membrane Lap: Thermoset membrane may be joined using uncured tape or proprietary adhesive.
(6) Edge Flashing: Proprietary.
(7) Membrane Flashing: Installed according to manufacturer's instructions.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 19:17, 18 February 2020 (view source) James Klassen (talk \| contribs) ← Older edit	Revision as of 19:45, 18 February 2020 (view source) James Klassen (talk \| contribs) m (James Klassen moved page EPDM 1.1.3 Fully Adhered System (generic) to EPDM 1.3.1-2 Conventionally Insulated System (adhered)) Newer edit →
(No difference)