Difference between revisions of "ASM Valley (Hooked)"

Revision as of 21:26, 17 August 2020

RoofStar Guarantee Standards are blue-linked

ASM Details

File:ASM 10.11.jpg

Click below for a printable version of this page.

(1) Architectural Metal Roof Panel
(2) Valley Panel Overlap: Set in two continuous rows of accepted caulking or sealant tape.
(3) Ventilation Layer: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(4) Underlayment: The type of underlay required is determined by roof slope.
(5) Membrane Strip-in: Accepted self-adhered modified bituminous eave protection membrane.
(6) Continuous Built-In Hook Strip
(7) Fastening: Metal valley panels to be secured with compatible, non-corrosive, flat head fasteners 200 mm (8") o/c. Metal roof panel to metal valley panel overlap must be a minimum of 125 mm (5").
(8) Valley Protection Membrane: Accepted self-adhered modified bituminous eave protection membrane.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

@@ Line 20: / Line 20: @@
 ;(1) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMPANEL |'''Architectural Metal Roof Panel''']]
 ;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMVALOVERLAP |'''Valley Panel Overlap''']]: Set in two continuous rows of accepted caulking or sealant tape.
-;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSLIP|'''Slip Sheet''']]: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
+;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSLIP|'''Ventilation Layer''']]: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
 ;(4) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMUNDERLAYMENT|'''Underlayment''']]: The type of underlay required is determined by roof slope.
 ;(5) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMICE|'''Membrane Strip-in''']]: Accepted self-adhered modified bituminous eave protection membrane.