Difference between revisions of "ASM Eave and Rake Edges (Mechanical Seams)"

Revision as of 22:42, 21 December 2015

(1) Ice Dam Protection: Accepted self-adhered modified bituminous membrane.

(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.

(3) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.

(4) Architectural Metal Roof Panel

(5) Continuous Metal Cleat

(6) Metal Fascia Flashing

(7) Continuous Edge Metal Flashing

(A) Acceptable Deck

(B) Wood Nailer

(C) Fascia Board

NOTE: * Refer to RGC Guarantee Standards for additional requirements.

@@ Line 1: / Line 1: @@
+<HR>
 [[File:8.1.4.3.1.jpg]]
@@ Line 31: / Line 32: @@
 <hr>
+[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''ASM Application'']]
+[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''ASM Construction Details'']]
 [[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]