Difference between revisions of "Materials:Sopra-Iso Plus"
Difference between revisions of "Materials:Sopra-Iso Plus"
| Line 1: | Line 1: | ||
| + | '''PRODUCT GROUP: [[Roof Deck Insulation#7Polyiso|Polyisocyanurate Insulation]]''' | ||
| + | <hr> | ||
| − | + | '''MANUFACTURER:''' '''[[Soprema Inc.]]''' | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''ADDRESS:''' '''[http://www.rcabc.org/consumers/search-for-a-roofing-contractor/ Contact Information]''' | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<u>DESCRIPTION</u> | <u>DESCRIPTION</u> | ||
Revision as of 19:28, 20 June 2016
PRODUCT GROUP: Polyisocyanurate Insulation
MANUFACTURER: Soprema Inc.
ADDRESS: Contact Information
DESCRIPTION
The roofing assembly / material information published in the RGC Roofing Practices Manual does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.
Sopra-Iso Plus cores are state-of-the-art, closed-cell polyisocyanurate foam produced through the use of environmentally safe procedures. Polyisocyanurate, the most widely used and accepted foam insulation product in use today, provides superior fire performance characteristics and the ability to retain high R-Values. Designed for use in commercial roof applications. Sopra-Iso Plus is available in 25 mm (1"), 37 mm (1.5"), and 50 mm (2") thicknesses. Sopraiso A is manufactured for exceptional strength, using dimensionally stable facers to add toughness to the boards and meet high quality standards.
SOPRA-ISO PLUS
Polyisocyanurate core integrally laminated to a specially coated facer.
| Long Term Thermal Resistance (LTTR): | RSI value = 1.06 / 25 mm (1") [R Value = 6.0 / 25mm (1")]> |
| Foam Density: | 32 kg / cu.m (2.0 lb / cu ft.) |
| Compressive Strength | 138 kpa (20 psi) |
| Uses | Do not use with hot applied membranes, i.e. coal tar or asphalt |
| Standards | Conforms to CAN / ULC S704-01 / CAN/ CGSB 51.26-M86 |
| FM-Class 1, I-60, I-90 | |
| UL C S-126 | |
| Standard Sizes | 1.2 m x 1.2 m (48" x 48") for Asphalt or adhesive applied applications |
| 1.2 m x 2.4 m (48" x 96") for Mechanically fastened applications |
Download a copy of the Technical Data Sheet