|
|
| Line 32: |
Line 32: |
| | ;Manufacturer online resources: [https://www.carlislesyntec.com/en/Roofing-Products/Specialty/Roof-Garden Roof Garden Systems] | | ;Manufacturer online resources: [https://www.carlislesyntec.com/en/Roofing-Products/Specialty/Roof-Garden Roof Garden Systems] |
| | ;System Type: Extensive | | ;System Type: Extensive |
| − | ;System Depth: (min/max) 140 mm (5-1/2") | + | ;System Depth: 140 mm (5-1/2") to 165.1 mm (6-1/2") |
| − | ;Growing Media Depth: (min/max) 101.6 mm (4") | + | ;Growing Media Depth: 101.6 mm (4") to 127 mm (5") |
| | ;Vegetation Profile: Sedum-Herbaceous-Grass | | ;Vegetation Profile: Sedum-Herbaceous-Grass |
| | ;Suitable climate zones: conditional on the specified vegetation profile (refer to the ''Design Authority''/''Green Roof Design Professional'') | | ;Suitable climate zones: conditional on the specified vegetation profile (refer to the ''Design Authority''/''Green Roof Design Professional'') |
Latest revision as of 22:37, 5 December 2024
Division C - Accepted Materials
Group - Vegetated Roof Systems
Carlisle Roof Garden Extensive Stormwater Retention System
by Carlisle SynTec Systems Canada
| System/Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Vegetated Roof System Manufacturer
- Carlisle SynTec Systems Canada
- Accepted for the RoofStar Guarantee Program
- October 25, 2024
- Accepted for application in
- Vegetated Roof Systems
- Acceptance Criteria
- Refer to the RGC Standard for Vegetated Roofs
- System Summary
- Carlisle Roof Garden Extensive Stormwater Retention System is a shallow, built-in-place extensive green roof system featuring 10.16 cm (4 in) of growth media. It incorporates a specialized 2.54 cm (1 in) thick mineral wool retention blanket placed over a custom drainage board to enhance water retention. For projects with higher stormwater management needs, additional layers of mineral wool can be added to further increase retention capacity, allowing for flexible solutions tailored to specific project requirements (Adapted from the manufacturer's summary. See the link at right to the manufacturer's online resources page for more information).
- Manufacturer online resources
- Roof Garden Systems
- System Type
- Extensive
- System Depth
- 140 mm (5-1/2") to 165.1 mm (6-1/2")
- Growing Media Depth
- 101.6 mm (4") to 127 mm (5")
- Vegetation Profile
- Sedum-Herbaceous-Grass
- Suitable climate zones
- conditional on the specified vegetation profile (refer to the Design Authority/Green Roof Design Professional)
- System Components*
- In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)
- Conventionally Insulated Roof Assembly by roofing Contractor
|
- †Guarantor's Notes
- Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly.
- While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6..
- *Conditions and Limitations
- Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.
- Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.
|
Back to Accepted Materials
Home
