Manufacturers:Polyglass USA, Inc.

Jump to: navigation, search

Manufacturers:Polyglass USA, Inc.

Revision as of 21:25, 8 September 2021 by James Klassen (talk | contribs)



Division C - Accepted Materials


Polyglass USA, Inc.
Associate Member (Manufacturer)

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.
Manufacturer: Polyglass USA, Inc.
Website
http://www.polyglass.com
Contact Address
See the current Membership list and contact information at www.rcabc.org
Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category
Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.

Accessories

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the roofing or waterproofing assembly. Accessories are not currently part of the Accepted Material program, but are listed here for reference to specifiers, designers and installers.
Miscellaneous
PolySlope

Accepted Materials

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.