Working Page 1
Working Page 1
Revision as of 15:53, 30 June 2022 by James Klassen (talk | contribs)
- Division D - Construction Details
- Construction Details for Asphalt Shingle Roof Systems
- The drawings linked on this page are intended to represent a variety of asphalt shingle roof system applications while remaining generic with regards to manufacturer's specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturer's specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about Asphalt Shingle Roof System designs and requirements, see the Standard for Asphalt Shingle Roof Systems.
Part 6 - Air and Vapour Controls
Continuity and Support ( Article 6.3.2.1.)
Part 9 - Roof Field (Shingle Systems)
Application (Common and Steep Slopes) ( Article 9.3.2.4.)
Application (Low Slopes) ( Article 9.3.2.4.)
Changes in Slope ( Article 9.3.2.7.)
Part 10 - Perimeters and Valleys
Eave and Rake Edge Details ( Article 10.3.4.2.)
Valleys ( Article 10.3.5.2.)
Valley Intersections with Ridge ( Article 10.3.5.9.)
Intersections with Waterproofing Roof Systems ( Article 10.3.7.2.)
Part 11 - Drainage
Membrane Gutters ( Article 11.3.3.8.)
Part 12 - Penetrations and Curbs
Penetration Flashing ( Article 12.3.2.1.)
Curbs ( Article 12.3.2.4.)
Part 13 - Linear Metal Flashing
- See the separate page, Details for Linear Metal Flashings.
Standard for Asphalt Shingle Roof Systems
© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.