Manufacturers:Polyglass USA, Inc.
Manufacturers:Polyglass USA, Inc.
Division C - Accepted Materials
Polyglass USA, Inc.
Associate Member (Manufacturer)
| Materials Listed by Category
|
|
| Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes
The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024). Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website. |
Waterproofing Roofs
Insulation
- Polyisocyanurate Foam
- Polytherm G awaiting TDS
Insulation Overlay Panels
- Asphaltic Overlays
- Polyboard E (4.5 and 6 mm) awaiting TDS
- Polyboard W (4.5 mm) awaiting TDS
- Membrane-laminated Overlays
- Polyboard 180 Combo (Base sheet, Overlay Board)
SBS Polymer-Modified Bituminous Membranes
(See the membrane tables in Division C)
- Base Sheets
- Elastoflex SA Base
- Elastoflex SA Base Plus
- Elasoflex SA Polar Base
- Elastoflex S6 2.2 (S/S, P/S, P/P)
- Elastoflex S6 2.5 (S/S, P/S)
- Elastoflex S6 3.0 (P/P)
- Elastoflex S6 HP awaiting TDS
- Elastoflex SA V Plus awaiting TDS
- Elastoflex SA V Plus FR awaiting TDS
- Elastoflex V
- Elastoflex VP
- Elastovent awaiting TDS
Waterproofing Roofs
SBS Polymer-Modified Bituminous Membranes (Cont.)
(See the membrane tables in Division C)
- Interplies
- Elastoflex SA V
- Elastoflex SA V FR
- Cap Sheets
- Elastoflex S6 G
- Elastoflex S6 G FR
- Elastoflex SA P
- Elastoflex SA P FR
- Elastoflex S6 G C HP (250)
- Elastoflex S6 G C HP FR (250)
- Elastoflex SA P Polar Cap awaiting TDS
- Elastoflex VP G HP
- Elastoshield TS G FR
- Polyfresko G SBS
- Polyfresko G SBS FR
APP Polymer-Modified Bituminous Membranes
(See the membrane tables in Division C)
- Base Sheets
- Polyflex APP (Plastomeric) Membrane
Liquid Membrane Flashing Systems
(See the membrane tables in Division C)
Two-Component Reinforced Liquid Membrane Flashing
Single-component Liquid Membrane Flashing
Water-shedding Roofs
Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)
- Self-adhered Materials
- Polystick IR-Xe
- Polystick MTS
- Polystick TU Plus
Underlayment/Eave Protection (ASM)
- Self-adhered Materials
- Polystick MTS
Accessories
| An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the Waterproofing or Water-shedding system. An Accessory is not an Accepted Material and therefore the RoofStar Guarantee does not extend to cover any potential material or installation failure. Accessories are listed in the Roofing Practices Manual merely for reference to specifiers, designers and installers. |
- Membranes
- Polyfresko G SA
- Polyfresko G FR
- Polyfresko G
- Membranes
- Polyflex G FR
- Polyflex G HP
© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.