Division C - Accepted Materials
Group - Vegetated Roof Systems
Carlisle Semi-Intensive Roof Garden System
by Carlisle SynTec Systems Canada
| System/Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- System Summary
- Carlisle Semi-Intensive Roof Garden System, also known as a "medium" green roof, is a built-in-place system with a growing media depth ranging from 12.7 cm (5 in) to 20.3 cm (8 in). Semi-Intensive systems are typically chosen for projects requiring greater water retention and/or a more diverse plant palette. Due to the increased media depth and variety of vegetation options, these systems require a heat-welded root barrier to protect the roof membrane. These systems also tend to be heavier and demand more maintenance and watering compared to extensive green roofs.
- (Adapted from the manufacturer's summary)
- System Depth
- 158.8 mm (6-1/4") to 235 mm (9-1/4")
- Growing Media Depth
- 127 mm (5") to 203.2 mm (8")
- Vegetation Profile
- as specified by the Design Authority/Green Roof Design Professional (See Conditions and Limitations below)
- Suitable climate zones
- conditional on the specified vegetation profile (refer to the Design Authority/Green Roof Design Professional)
- System Components
- Semi-Intensive Growth Media (Click [link here] for the Technical Data Sheet PDF)
- MiraDRAIN G4 (includes moisture retention, drainage layer, and protection fabric) (Click [link here] for the Technical Data Sheet PDF)
- Roof Garden Aluminum Edge (Click [link here] for the Technical Data Sheet PDF)
- Roof Garden Aluminum Drain Box (Click [link here] for the Technical Data Sheet PDF)
- Root Barrier (Click [link here] for the Technical Data Sheet PDF)
- 300HV Protection Fabric (Click [link here] for the Technical Data Sheet PDF)
- Conditions and Limitations
- Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.
- Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.
|
Back to Accepted Materials
Home
