SBS Fall Protection Anchor in Roof

SBS Details

1 WORK INCLUDED

(1) Flashing

0.08 mm (0.032", 20 gauge) Aluminum or 0.56 mm (16 oz) copper to CSA B272-93 flashing supplied by anchor manufacturer with flanges sealed by roofer.

(2) Flashing Flange

minimum 100 mm (4") flange set in coating of compatible sealant.

(3) Primary Membrane and Membrane Flashing.

(4) Protected Membrane Roof Assembly

Flashing to extend a minimum 200 mm (8") above finished roof surface (pavers, ballast, or walkways)

(5) Conventional Roof Assembly

Flashing to extend a minimum 200 mm (8") above finished roof surface.

(6) Insulation

See available insulation products in the Accepted Materials section of this Manual.

---

2 WORK BY OTHERS

(A) Acceptable Deck

Concrete slab shown, see anchor manufacturer's attachment details for other deck types.

(B) Roof Anchor

to CSA Z91-M90

(C) Anchor Eye

to CSA Z91-M90

(D) Water Tight Cap

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

---

Back to SBS Application

Back to SBS Construction Details

Back to Construction Details