ASM Roof System Details
ASM Roof System Details
Revision as of 14:46, 25 April 2019 by James Klassen (talk | contribs)
- The drawings contained within this section are intended to represent a variety of architectural metal roof system designs and applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about architectural metal roof (ASM) system designs, see ASM (Architectural Sheet Metal) Roof Assemblies.
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
1 GENERAL
2 SUPPORTING STRUCTURES: Decks and Walls
3 SECURING the ROOF ASSEMBLY
4 MATERIALS
5 DECK and WALL OVERLAYS
6 AIR & VAPOUR CONTROLS
7 INSULATION
8 EAVE PROTECTION, UNDERLAYMENTS and DRAINAGE
9 PANELS
10 PERIMETER and VALLEY FLASHING
- ASM 10.1.1 Eave & Rake Flashing (Mechanical Seam)
- E1.7.4 Eave & Gable Protection for Proprietary Systems
- E1.7.18 Copper Standing Seam Systems Eave & Gable Flashing
- E1.7.19 Zinc Standing Seam Systems Eave & Gable Flashing
- ASM 10.3.1 Hooked Valley Flashing PDF
- E1.7.6 Metal Valley - Unhooked Flashing
- E1.7.7 Roof-to-Wall Flashing
- E1.7.11 Ridge / Hip Cap Flashing
- E1.7.12 Notched Ridge / Hip Cap Flashing
- E1.7.13 Vented Ridge / Hip Cap Flashing
- E1.7.14 Proprietary Vented Ridge / Hip Cap Flashing
- E1.7.15 Proprietary Vented Wall Flashing
11 PENETRATIONS and CURBS
- ASM 11.1.1 Pipe Flashing PDF
- ASM 11.1.2 Pipe Flashing, Split Panel PDF
- ASM 11.1.3 Curb, Split Panel PDF
12 OTHER DETAILS