Linear Metal Flashing Details
Linear Metal Flashing Details
Revision as of 15:21, 9 December 2019 by James Klassen (talk | contribs)
- The drawings contained within this section are intended to represent a variety of sheet metal flashing applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about sheet metal flashing designs and requirements, see Metal Perimeter Flashing (SBS) or parallel sections for EPDM and TPO/PVC membranes, in the RoofStar Guarantee Standards.
.jpg)
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
- MF 13.3.1-1 Metal Cap Flashings (joints)
- MF 13.3.1-2 Metal Cap Flashings (inside corner)
- MF 13.3.1-3 Metal Cap Flashings (Parapet-to-Wall Transition - Site Formed)
- NOTE: The following pages are currently under construction