ASM Eave and Rake Edges (Mechanical Seams)
ASM Eave and Rake Edges (Mechanical Seams)
Revision as of 15:07, 17 August 2020 by James Klassen (talk | contribs) (James Klassen moved page ASM 10.1.1 Eave & Rake Flashing (Mechanical Seam) to ASM 10.1.1 Eave and Rake Flashing (Mechanical Seam))
| RoofStar Guarantee Standards are blue-linked |
ASM Details
.jpg)
1 WORK INCLUDED
- (1) Ice and Water Protection
- Accepted self-adhered modified bituminous membrane.
- (2) Slip Sheet
- Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
- (3) Metal Panel Clip
- Installed to metal roof panel manufacturer’s printed instructions.
- (4) Architectural Metal Roof Panel
- (5) Continuous Metal Cleat
- (6) Metal Fascia Flashing
- (7) Edge Metal Flashing (Continuous)
2 RELATED WORK BY OTHERS
- (A) Acceptable Deck
- (B) Wood Nailer
- (C) Fascia Board
NOTE: Refer to RoofStar Guarantee Standards for additional requirements.
RoofStar Guarantee Standards for ASM Roof Assemblies