Manufacturers:Precision Metals Ltd.
Manufacturers:Precision Metals Ltd.
Revision as of 18:41, 5 February 2021 by James Klassen (talk | contribs)
The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise. |
Manufacturer: Precision Metals Ltd.
|
- Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category
- Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.
Waterproofing System Materials
Roofs
Drains
- Internal flange-type roof drains
- Spun Copper Drain
- Spun Aluminum Drain
- Spun Copper Drain (Clamping)
- Spun Aluminum Drain (Clamping)
- External flange-type roof drains
- Copper Hot-welded Drain
- Scupper and Overflow Drains
- Copper Scupper (Open top)
Penetration Flashings
- Galvanized Penetration Flashings
- Hot-welded B-vent (Flat)
- Aluminium and Copper Penetration Flashings
- Aluminum Stack (Pipe flashing)
- Aluminum Stack Cap (Standard)
- Aluminum Stack Cap (Anti-vandal)
Grade-level Waterproofing
Drains
Penetration Flashings
- Galvanized Penetration Flashings
- Hot-welded B-vent (Flat)
- Aluminium and Copper Penetration Flashings
- Aluminum Stack (Pipe flashing)
- Aluminum Stack Cap (Standard)
- Aluminum Stack Cap (Anti-vandal)
Water-shedding System Materials
Roofs
Penetration Flashings
- Galvanized Penetration Flashings
- Hot-welded B-vent (Sloped)
- Aluminum Stack Flashing (Sloped)
- Gooseneck Vent
- PRT Bath/Dryer/Stove Vent