ASM Eave and Rake Edges (Mechanical Seams)

Jump to: navigation, search

ASM Eave and Rake Edges (Mechanical Seams)

Revision as of 17:12, 23 October 2017 by James Klassen (talk | contribs) (→‎RELATED WORK BY OTHERS)
RoofStar Guarantee Standards are blue-linked
ASM Details

ASM 10.1.1 Eave and Rake Flashing (Mechanical Seam).jpg

1 WORK INCLUDED

(1) Ice and Water Protection
Accepted self-adhered modified bituminous membrane.
(2) Slip Sheet
Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
(3) Metal Panel Clip
Installed to metal roof panel manufacturer’s printed instructions.
(4) Architectural Metal Roof Panel
(5) Continuous Metal Cleat
(6) Metal Fascia Flashing
(7) Edge Metal Flashing (Continuous)

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Wood Nailer
(C) Fascia Board

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.



RoofStar Guarantee Standards for ASM Roof Systems

Back to ASM Construction Details

Back to Construction Details

Retrieved from "http://rpm.rcabc.org/index.php?title=ASM_Eave_and_Rake_Edges_(Mechanical_Seams)&oldid=17915"