Asphalt Shingle System Details
Asphalt Shingle System Details
Revision as of 14:39, 21 August 2019 by James Klassen (talk | contribs)
| Editor's note |
|---|
| This page is currently under revision, as new details and printable detail pages are added. Continue to watch for further updates to the this page and the displayed links. |
- The drawings linked on this page are intended to represent a variety of Asphalt Shingle roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult the manufacturers’ specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about Asphalt Shingle roof system designs and requirements, see Asphalt Shingle Systems.
.jpg)
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
1 GENERAL
2 SUPPORTING STRUCTURES: Decks and Walls
3 SECURING the ROOF ASSEMBLY
4 MATERIALS
5 DECK and WALL OVERLAYS
6 AIR, VAPOUR & VENTILATION CONTROLS
7 INSULATION
8 EAVE PROTECTION, UNDERLAYMENTS
9 FIELD SHINGLES
10 PERIMETERS and WALLS
- E2.7.3 Open Valley
- E2.7.4 Closed Cut Valley
- E2.7.5 Woven Valley
- E2.7.6 Upper Junction Detail - Asphalt Shingle at BUR
- E2.7.7 Lower Junction Detail - Asphalt Shingle at BUR
- E2.7.8 Eave Detail - All Slopes
11 DRAINAGE and PENETRATIONS
- E2.7.9 Chimney Flashing Detail
- E2.7.10 Lead Vent - Typical
- E2.7.11 Counter-flashing - Diverter Flashing
- E2.7.12 Integral Flashing with Capillary Table
12 OTHER DETAILS (Built-in Gutters)
13 METAL FLASHINGS