ASM Eave and Rake Edges (Mechanical Seams)
ASM Eave and Rake Edges (Mechanical Seams)
Revision as of 21:28, 17 August 2020 by James Klassen (talk | contribs)
| RoofStar Guarantee Standards are blue-linked |
ASM Details
.jpg)
1 WORK INCLUDED
- (1) Architectural Metal Roof Panel
- (2) Ventilation Layer
- Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
- (3) Underlayment
- The type of underlay required is determined by roof slope.
- (4) Metal Panel Clip
- Installed to metal roof panel manufacturer’s printed instructions.
- (4) Architectural Metal Roof Panel
- (5) Eave Protection
- One ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 100 mm (4") minimum on ends.
- (6) Metal flashing underlayment/separation membrane
- required for metal flashings installed on wood substrates.
- (7) Edge Metal Flashing (Continuous)
- (8) Continuous metal cleat
2 RELATED WORK BY OTHERS
- (A) Acceptable Deck
- (B) Fascia Board
NOTE: Refer to RoofStar Guarantee Standards for additional requirements.
RoofStar Guarantee Standards for ASM Roof Assemblies