Table Drafts 3

1 Part 9: Single-ply Table (5/10-year Guarantee)

Table 9.1 Single-ply Membranes: RoofStar 5 and 10-Year Guarantee
(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)
*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.

	Exposed Roof Systems						Protected Roof Systems			Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems				Built-in Gutters		Ballasted	PMR Systems	Roof as a Platform
	Mechanically Fastened*	Self-adhered	Adhered		Adhesive- applied or Self-adhered		Loose-laid	Self-adhered, Adhesive- applied or Hot-mopped	Self-adhered, Adhesive- applied or Hot-mopped	Self-adhered, Adhesive- applied or Hot-mopped
			Adhesive- applied or Hot-mopped (Smooth)	Adhesive- applied or Hot-mopped (Fleece-backed)
Type, Reinforcement, Grade	mm (mils)	mm (mils)	mm (mils)	mm (mils)	mm (mils)		mm (mils)	mm (mils)	mm (mils)	mm (mils)
EPDM (reinforced)	1.524 (60)	1.524 (60)	1.143 (45)		1.524 (60)		1.143 (45)	1.143 (45)	1.524 (60)
EPDM (unreinforced)		1.524 (60)	1.143 (45)	2.794 (110)	1.524 (60)		1.143 (45)	1.143 (45)	1.524 (60)
TPO	1.143 (45)	1.524 (60)	1.143 (45)	2.794 (110)	1.524 (60)		1.143 (45)	1.143 (45)	1.524 (60)
PVC	1.270 (50)		1.270 (50)	2.667 (105)	1.524 (60)		1.270 (50)	1.270 (50)	1.524 (60)	1.524 (60)

2 Part 9: Single-ply Table (5/10-year Guarantee) REV. 1

Table 9.1 Single-ply Membranes: RoofStar 5 and 10-Year Guarantee
(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)

	Exposed Roof Systems						Protected Roof Systems		Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems				Built-in Gutters		Ballasted	PMR Systems
	Mechanically Fastened*	Self-adhered	Adhered		Adhesive- applied or Self-adhered		Loose-laid	Self-adhered, Adhesive- applied or Hot-mopped	Self-adhered, Adhesive- applied or Hot-mopped
			Adhesive- applied or Hot-mopped (Smooth)	Adhesive- applied or Hot-mopped (Fleece-backed)
Type, Reinforcement, Grade	mm (mils)	mm (mils)	mm (mils)	mm (mils)	mm (mils)		mm (mils)	mm (mils)	mm (mils)
EPDM (reinforced)	1.524 (60)	1.524 (60)	1.143 (45)		1.524 (60)		1.143 (45)	1.143 (45)
EPDM (unreinforced)		1.524 (60)	1.143 (45)	2.794 (110)	1.524 (60)		1.143 (45)	1.143 (45)
TPO	1.143 (45)	1.524 (60)	1.143 (45)	2.794 (110)	1.524 (60)		1.143 (45)	1.143 (45)
PVC	1.270 (50)		1.270 (50)	2.667 (105)	1.524 (60)		1.270 (50)	1.270 (50)	1.524 (60)

*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.

3 Part 9: Single-ply Table (15-year Guarantee)(FINAL)

Table 9.2 Single-ply Membranes: RoofStar 15-Year Guarantee
(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)
*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.

	Exposed Roof Systems						Protected Roof Systems			Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems				Built-in Gutters		Ballasted	PMR Systems	Roof as a Platform
	Mechanically Fastened*	Self-adhered	Adhered		Adhesive- applied or Self-adhered		Loose-laid	Self-adhered, Adhesive- applied or Hot-mopped	Self-adhered, Adhesive- applied or Hot-mopped	Self-adhered, Adhesive- applied or Hot-mopped
			Adhesive- applied or Hot-mopped (Smooth)	Adhesive- applied or Hot-mopped (Fleece-backed)
Type, Reinforcement, Grade	mm (mils)	mm (mils)	mm (mils)	mm (mils)	mm (mils)		mm (mils)	mm (mils)	mm (mils)	mm (mils)
EPDM (reinforced)	1.524 (60)	1.524 (60)	1.524 (60)		2.286 (90)			1.524 (60)	2.286 (90)
EPDM (unreinforced)		1.524 (60)	1.524 (60)	2.790 (110)	2.286 (90)			1.524 (60)	2.286 (90)
TPO	1.524 (60)	1.524 (60)	1.524 (60)	2.790 (110)	2.032 (80)			1.524 (60)	2.032 (80)
PVC	1.524 (60)		1.524 (60)	2.667 (105)	2.032 (80)			1.524 (60)	2.032 (80)

4 Part 9: Single-ply Table (15-year Guarantee) REV. 1

Table 9.2 Single-ply Membranes: RoofStar 15-Year Guarantee
(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)

	Exposed Roof Systems						Protected Roof Systems		Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems				Built-in Gutters		Ballasted	PMR Systems
	Mechanically Fastened*	Self-adhered	Adhered		Adhesive- applied or Self-adhered		Loose-laid	Self-adhered, Adhesive- applied or Hot-mopped	Self-adhered, Adhesive- applied or Hot-mopped
			Adhesive- applied or Hot-mopped (Smooth)	Adhesive- applied or Hot-mopped (Fleece-backed)
Type, Reinforcement, Grade	mm (mils)	mm (mils)	mm (mils)	mm (mils)	mm (mils)		mm (mils)	mm (mils)	mm (mils)
EPDM (reinforced)	1.524 (60)	1.524 (60)	1.524 (60)		2.032 (80)			1.524 (60)
EPDM (unreinforced)		1.524 (60)	1.524 (60)	2.790 (110)	2.032 (80)			1.524 (60)
TPO	1.524 (60)	1.524 (60)	1.524 (60)	2.790 (110)	2.286 (90)			1.524 (60)
PVC	1.524 (60)		1.524 (60)	2.667 (105)	2.286 (90)			1.524 (60)

*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.

5 Part 9: 2-ply Model (5/10-year Guarantee)(REV. FINAL)

Table 9.1 SBS-modified Bituminous Membranes: RoofStar 5 and 10-Year Guarantee
Applies to Field and Flashing membranes. All thicknesses shown are in mm

	Exposed Roof Systems									Protected Roof Systems				Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems					Built-in Gutters	Single- ply Cap			PMR Systems		Roof as a Platform
	Mechanic- ally fastened	Heat- welded	Adhered			Heat- welded, Adhesive- applied, Self- adhered	Adhesive- applied	Puncture Resistance		Heat- welded, Adhesive- applied	Puncture Resistance	Heat- welded, Adhesive- applied	Puncture Resistance	Heat- welded, Adhesive- applied, Self- adhered	Puncture Resistance
			Self- adhered	Hot- mopped	Adhesive- applied
Type, Reinforcement, Grade	mm	mm	mm	mm	mm	mm	mm	(N)		mm	(N)	mm	(N)	mm	(N)
Base (fibreglass) - Gr. 3	2.30	2.30	2.30	2.20	2.20					3.00				3.00
Base (polyester) - Gr. 3	2.50	2.50	2.50	2.20	2.20	3.00				3.00		3.50	400	3.00
Base (composite) - Gr. 3	2.30	2.30	2.30	2.20	2.20	3.00				3.50		3.50	400	3.00
Film Cap (fibreglass) - Gr. 2		4.00	3.30	3.30	3.30
Film Cap (polyester) - Gr. 2		4.00	3.50	3.50	3.50	3.00	4.00	400		3.00	400	4.00	400	3.00	400
Film Cap (composite) - Gr. 2		4.00	3.30	3.30	3.30	3.00	4.00	400		3.00	400	4.00	400	3.00	400
Granule Cap (fibreglass) - Gr. 1		4.00	3.30	3.30	3.30
Granule Cap (polyester) - Gr. 1		4.00	3.50	3.50	3.50	3.50	4.00	400		3.00	400	4.00	400	3.00	400
Granule Cap (composite) - Gr. 1		3.30	4.00	3.30	3.30	3.50	4.00	400		3.00	400	4.00	400	3.00	400

6 Part 9: 2-ply Model (5/10-year Guarantee) REV. 1

Table 9.1 SBS-modified Bituminous Membranes: RoofStar 5 and 10-Year Guarantee
Applies to Field and Flashing membranes. All thicknesses shown are in mm

	Exposed Roof Systems							Protected Roof Systems		Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems					Built-in Gutters		PMR Systems
	Mechanic- ally fastened	Heat- welded	Adhered			Heat- welded, Adhesive- applied, Self- adhered		Heat- welded, Adhesive- applied	Puncture Resistance	Heat- welded, Adhesive- applied, Self- adhered	Puncture Resistance
			Self- adhered	Hot- mopped	Adhesive- applied
Type, Reinforcement, Grade	mm	mm	mm	mm	mm	mm		mm	(N)	mm	(N)
Minimum Combined 2-ply Thickness	6.00						6.00	N/A	6.00	N/A
Base (Fibreglass) - Gr. 3	2.30	2.30	2.30	2.20	2.20
Base (Composite fibreglass) - Gr. 3	2.30	2.30	2.30	2.20	2.20	2.50	2.20		2.20
Base (Polyester) - Gr. 3	2.50	2.50	2.50	2.20	2.20	2.50	2.20		2.20
Base (Composite) - Gr. 3	2.30	2.30	2.30	2.20	2.20	2.50	2.20		2.20
Factory Laminated Base (panel)	2.20						2.20	N/A		N/A
Film Cap (Fibreglass) - Gr. 2		4.00	3.30	3.30	3.30
Film Cap (Polyester) - Gr. 2		4.00	3.50	3.50	3.50	3.00	3.00	400	3.00	400
Film Cap (Composite) - Gr. 2		4.00	3.30	3.30	3.30	3.00	3.00	400	3.00	400
Granule Cap (Fibreglass) - Gr. 1		4.00	3.30	3.30	3.30
Granule Cap (Polyester) - Gr. 1		4.00	3.50	3.50	3.50	3.50	3.00	400	3.00	400
Granule Cap (Composite) - Gr. 1		3.30	4.00	3.30	3.30	3.50	3.00	400	3.00	400

7 Part 9: 2-ply Model (15-year Guarantee)(REV. FINAL)

Table 9.2 SBS-modified Bituminous Membranes: RoofStar 15-Year Guarantee
Applies to Field and Flashing membranes. All thicknesses shown are in mm

	Exposed Roof Systems									Protected Roof Systems				Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems					Built-in Gutters	Single- ply Cap			PMR Systems		Roof as a Platform
	Mechanic- ally fastened	Heat- welded	Adhered			Heat- welded, Adhesive- applied, Self- adhered	Adhesive- applied	Puncture Resistance		Heat- welded, Adhesive- applied	Puncture Resistance	Heat- welded, Adhesive- applied	Puncture Resistance	Heat- welded, Adhesive- applied, Self- adhered	Puncture Resistance
			Self- adhered	Hot- mopped	Adhesive- applied
Type, Reinforcement, Grade	mm	mm	mm	mm	mm	mm	mm	(N)		mm	(N)	mm	(N)	mm	(N)
Base (fibreglass) - Gr. 3										3.00				3.00
Base (polyester) - Gr. 3		2.50	2.50	2.50	2.50	3.00				3.00		3.50		3.00
Base (composite) - Gr. 3		2.50	2.50	2.50	2.50	3.00				3.00		3.50		3.00
Film Cap (fibreglass) - Gr. 2
Film Cap (polyester) - Gr. 2		4.00	4.00	4.00	4.00	4.00	4.00	400		3.00	400	4.00	400	3.00	400
Film Cap (composite) - Gr. 2		4.00	4.00	4.00	4.00	4.00	4.00	400		3.00	400	4.00	400	3.00	400
Granular Cap (fibreglass) - Gr. 1		4.00	4.00	4.00	4.00
Granular Cap (polyester) - Gr. 1		4.00	4.00	4.00	4.00	4.00	4.00	400		3.00	400	4.00	400	3.00	400
Granular Cap (composite) - Gr. 1		4.00	4.00	4.00	4.00	4.00	4.00	400		3.00	400	4.00	400	3.00	400

8 Part 9: 2-ply Model (15-year Guarantee) REV. 1

Table 9.1 SBS-modified Bituminous Membranes: RoofStar 5 and 10-Year Guarantee
Applies to Field and Flashing membranes. All thicknesses shown are in mm

	Exposed Roof Systems							Protected Roof Systems		Grade-level Water- proofing
	Conventionally Insulated / Uninsulated Systems					Built-in Gutters		PMR Systems
	Mechanic- ally fastened	Heat- welded	Adhered			Heat- welded, Adhesive- applied, Self- adhered		Heat- welded, Adhesive- applied	Puncture Resistance	Heat- welded, Adhesive- applied, Self- adhered	Puncture Resistance
			Self- adhered	Hot- mopped	Adhesive- applied
Type, Reinforcement, Grade	mm	mm	mm	mm	mm	mm		mm	(N)	mm	(N)
Minimum Combined 2-ply Thickness	7.00						7.00	N/A	7.00	N/A
Base (fibreglass) - Gr. 3		2.50	2.50	2.50	2.50
Base (Composite fibreglass) - Gr. 3		2.50	2.50	2.50	2.50	2.90	2.50		2.50
Base (polyester) - Gr. 3		2.50	2.50	2.50	2.50	2.90	2.50		2.50
Base (composite) - Gr. 3		2.50	2.50	2.50	2.50	2.90	2.50		2.50
Factory Laminated Base (panel)	2.20						2.20	N/A		N/A
Film Cap (fibreglass) - Gr. 2
Film Cap (polyester) - Gr. 2		4.00	4.00	4.00	4.00	4.00	3.00	400	3.50	400
Film Cap (composite) - Gr. 2		4.00	4.00	4.00	4.00	4.00	3.00	400	3.50	400
Granular Cap (fibreglass) - Gr. 1		4.00	4.00	4.00	4.00
Granular Cap (polyester) - Gr. 1		4.00	4.00	4.00	4.00	4.00	3.00	400	3.50	400
Granular Cap (composite) - Gr. 1		4.00	4.00	4.00	4.00	4.00	3.00	400	3.50	400

9 Part 1: RoofStar 15-year Guarantee) SBS

1. To qualify for a RoofStar 15-year (Waterproofing Roofs) Guarantee, the following standards apply:
   1. Each Project must be designed and constructed in compliance with both the RoofStar Guarantee Standards and the membrane manufacturer’s 20-year System Warranty standards.
   2. The Contractor must apply to the membrane manufacturer for their 20-year System Warranty standards.
   3. Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a Tested Assembly, an Assembly with Proven Past Performance or a custom-engineered securement, the Project must comply with the higher securement requirements.
   4. In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
      1. Roofs must be designed for adequate access to facilitate maintenance (1.3.3).
      2. Materials left in place for partial roof system replacement must be scanned for moisture (1.4.2.2).
      3. All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) (2.2.2 and 2.2.3).
      4. All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers (2.2.3).
      5. Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage (7.1.2.1).
      6. An insulation overlay is required on all Conventionally Insulated Roof Systems (8.1.1.1).
      7. Only certain membranes will qualify for a RoofStar 15-year Guarantee (9.2).
      8. All drains and overflows require clamping rings, and overflows are required for each roof area (11.1.2.1).
      9. Enhanced penetration flashing requirements (11.1.3.1).
      10. Linear metal flashings must be fabricated from 24-gauge material (13.1.2.1).

10 Part 1: RoofStar 15-year Guarantee) EPDM

1. To qualify for a RoofStar 15-year (Waterproofing Roofs) Guarantee, the following standards apply:
   1. Each Project must be designed and constructed in compliance with both the RoofStar Guarantee Standards and the membrane manufacturer’s 20-year System Warranty standards.
   2. The Contractor must apply to the membrane manufacturer for their 20-year System Warranty standards.
   3. Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a Tested Assembly, an Assembly with Proven Past Performance or a custom-engineered securement, the Project must comply with the higher securement requirements.
   4. In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
      1. Roofs must be designed for adequate access to facilitate maintenance (1.3.3).
      2. Materials left in place for partial roof system replacement must be scanned for moisture (1.4.2.2).
      3. All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) (2.2.2 and 2.2.3).
      4. All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers (2.2.3).
      5. Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage (7.1.2.1).
      6. An insulation overlay is required on all Conventionally Insulated Roof Systems (8.1.1.1).
      7. Only certain membranes will qualify for a RoofStar 15-year Guarantee (9.2).
      8. All drains and overflows require clamping rings, and overflows are required for each roof area (11.1.2.1).
      9. Enhanced penetration flashing requirements (11.1.3.1).
      10. Linear metal flashings must be fabricated from 24-gauge material (13.1.2.1).

11 Part 1: RoofStar 15-year Guarantee) TPO

1. To qualify for a RoofStar 15-year (Waterproofing Roofs) Guarantee, the following standards apply:
   1. Each Project must be designed and constructed in compliance with both the RoofStar Guarantee Standards and the membrane manufacturer’s 20-year System Warranty standards.
   2. The Contractor must apply to the membrane manufacturer for their 20-year System Warranty standards.
   3. Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a Tested Assembly, an Assembly with Proven Past Performance or a custom-engineered securement, the Project must comply with the higher securement requirements.
   4. In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
      1. Roofs must be designed for adequate access to facilitate maintenance (1.3.3).
      2. Materials left in place for partial roof system replacement must be scanned for moisture (1.4.2.2).
      3. All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) (2.2.2 and 2.2.3).
      4. All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers (2.2.3).
      5. Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage (7.1.2.1).
      6. An insulation overlay is required on all Conventionally Insulated Roof Systems (8.1.1.1).
      7. Only certain membranes will qualify for a RoofStar 15-year Guarantee (9.2).
      8. All drains and overflows require clamping rings, and overflows are required for each roof area (11.1.2.1).
      9. Enhanced penetration flashing requirements (11.1.3.1).
      10. Linear metal flashings must be fabricated from 24-gauge material (13.1.2.1).

12 Part 1: RoofStar 15-year Guarantee) PVC

1. To qualify for a RoofStar 15-year (Waterproofing Roofs) Guarantee, the following standards apply:
   1. Each Project must be designed and constructed in compliance with both the RoofStar Guarantee Standards and the membrane manufacturer’s 20-year System Warranty standards.
   2. The Contractor must apply to the membrane manufacturer for their 20-year System Warranty standards.
   3. Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a Tested Assembly, an Assembly with Proven Past Performance or a custom-engineered securement, the Project must comply with the higher securement requirements.
   4. In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
      1. Roofs must be designed for adequate access to facilitate maintenance (1.3.3).
      2. Materials left in place for partial roof system replacement must be scanned for moisture (1.4.2.2).
      3. All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) (2.2.2 and 2.2.3).
      4. All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers (2.2.3).
      5. Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage (7.1.2.1).
      6. An insulation overlay is required on all Conventionally Insulated Roof Systems (8.1.1.1).
      7. Only certain membranes will qualify for a RoofStar 15-year Guarantee (9.2).
      8. All drains and overflows require clamping rings, and overflows are required for each roof area (11.1.2.1).
      9. Enhanced penetration flashing requirements (11.1.3.1).
      10. Linear metal flashings must be fabricated from 24-gauge material (13.1.2.1).

13 Available Guarantees (from Division A)

RoofStar Guarantees are available for five (5), ten (10) or fifteen (15)* years for commercial, industrial, institutional, multi-family, stratified and residential roofing and grade-level waterproofing. For a summary list of RoofStar 15-year Guarantee requirements, see 1.3.1 in any of the RoofStar Guarantee roof system Standards: SBS, EPDM, TPO, and PVC.