ASM Eave and Rake Edges (Mechanical Seams)
ASM Eave and Rake Edges (Mechanical Seams)
Revision as of 17:20, 21 December 2015 by James Klassen (talk | contribs) (Created page with "File:8.1.4.3.1.jpg === WORK INCLUDED === (1) <b>Ice Dam Protection</b>: Accepted self-adhered modified bituminous membrane. (2) <b>Slip Sheet</b>: Recommended over asp...")
.jpg)
1 WORK INCLUDED
(1) Ice Dam Protection: Accepted self-adhered modified bituminous membrane.
(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
(3) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.
(4) Architectural Metal Roof Panel
(5) Continuous Metal Cleat
(6) Metal Fascia Flashing
(7) Continuous Edge Metal Flashing
2 RELATED WORK BY OTHERS
(A) Acceptable Deck
(B) Wood Nailer
(C) Fascia Board
NOTE: * Refer to RGC Guarantee Standards for additional requirements.