ASM Eave and Rake Edges (Snap-Lock Seams)
ASM Eave and Rake Edges (Snap-Lock Seams)
Revision as of 17:21, 21 December 2015 by James Klassen (talk | contribs) (Created page with "File:8.1.4.4.1.jpg === WORK INCLUDED === (1) <b>Ice Dam Protection</b>: Accepted self-adhered modified bituminous membrane. (2) <b>Slip Sheet</b>: Recommended over asph...")
1 WORK INCLUDED
(1) Ice Dam Protection: Accepted self-adhered modified bituminous membrane.
(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
(3) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.
(4) Architectural Metal Roof Panel
(5) Continuous Metal Cleat
(6) Metal Fascia Flashing
(7) Edge Metal Flashing
(8) Preformed Closures
(9) Exposed Fasteners: High-domed gasketed cladding type screws compatible with metal roof panel.
(10) Rake Edge Metal Flashing
2 RELATED WORK BY OTHERS
(A) Acceptable Deck
(B) Fascia Board
NOTE: * Refer to RGC Guarantee Standards for additional requirements.