Linear Metal Flashing Details
Linear Metal Flashing Details
Revision as of 22:14, 31 August 2021 by James Klassen (talk | contribs) (James Klassen moved page Metal Flashing Details to Linear Metal Flashing Details)
- The drawings contained within this section are intended to represent a variety of sheet metal flashing applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
- For further information about sheet metal flashing designs and requirements, see Part 13 METAL FLASHING (SBS) or parallel sections for EPDM and TPO/PVC membranes, in the RoofStar Guarantee Standards.
.jpg)
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
- MF 13.3.1-1 Metal Cap Flashing (joints)
- MF 13.3.1-2 Metal Cap Flashing (inside corner)
- MF 13.3.1-3 Metal Cap Flashing (Parapet-to-Wall Transition - Site Formed)
- NOTE: The following pages are currently under construction