Manufacturers:Precision Metals Ltd.

Jump to: navigation, search

Manufacturers:Precision Metals Ltd.

Revision as of 14:34, 9 September 2021 by James Klassen (talk | contribs) (Drains)



Division C - Accepted Materials


Precision Metals Ltd.
Associate Member (Manufacturer)

The roofing assembly / materials listed below are accepted for use in the RoofStar Guarantee Program. Technical Data Sheets (TDS) may be found by clicking on the product link, unless indicated otherwise.
Manufacturer: Precision Metals Ltd.
Website
www.precisionmetals.ca
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
Canada
Country of Manufacture
Canada
Year First Installed
pre-2017
BC: pre-2017
Canada: Pre-2017
Foreign: N/A
Click the heading for a material type to link to tables displaying all other Accepted Materials in the same category
Materials shown with "TA" after the name have been used in wind-resistant Tested Assemblies. See also Securing the Roof Assembly and links to MARS, PARS and AARS material tables.

Roof Waterproofing System Materials

Drains

Deck Drains (not for roofs *)
Spun Aluminum Deck Drain
External flange-type roof drains
Copper Hot-welded Drain
Internal flange-type roof drains
Spun Copper Drain
Spun Aluminum Drain
Spun Copper Drain (Clamping)
Spun Aluminum Drain (Clamping)
Scupper and Overflow Drains
Copper Scupper (Open top)


* Refer to roof Standards for restrictions on drain types.

Penetration Flashings

Galvanized Penetration Flashings
Hot-welded B-vent (Flat)
Gooseneck Vent
PRT Bath/Dryer/Stove Vent
Aluminium and Copper Penetration Flashings
Aluminum Stack (Pipe flashing)
Aluminum Stack Cap (Standard)
Aluminum Stack Cap (Anti-vandal)

Accepted Materials

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.