Division C - Accepted Materials
Felt Buster
by GAF
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- www.gaf.com
- Accepted for the RoofStar Guarantee Program
- June 2021
- Accepted for application in
- Water-shedding Systems (All)
- Acceptance Criteria
- This material conforms to RGC Acceptance Criteria for Mechanically Attached Polymeric Roof Underlayments Used in Water-shedding Systems.
- Product Summary
- FeltBuster is a synthetic (polymeric) breathable "roofing felt" (16 Perms) manufactured with a slip-resistant top surface, and is mechanically fastened. It may be left exposed to Ultra-violet light for up to 90 days.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- This product is accepted by the RGC for use as an underlayment or (for ASM systems) as a separation layer and is not acceptable for use as eave protection.
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
