Linear Metal Flashing Details
Linear Metal Flashing Details
Revision as of 19:08, 22 November 2022 by James Klassen (talk | contribs)
- Division D - Construction Details
- Construction Details for Linear Metal Flashings
- The drawings linked on this page are intended to represent a variety of linear metal flashing applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturers’ specifications and the the relevant Standard to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
.jpg)
NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.
- Metal Cap Flashing (joints)
- Metal Cap Flashing (inside corner)
- Metal Cap Flashing (Parapet-to-Wall Transition - Site Formed)
- NOTE: The following pages are currently under construction
© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.