Manufacturers:HAL Industries Inc.

Jump to: navigation, search

Manufacturers:HAL Industries Inc.



Division C - Accepted Materials

HAL Industries Inc.
Associate Member (Manufacturer)

Materials Listed by Category


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
http://www.halind.com/
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
Country of Manufacture
Year First Installed
BC:
Canada:
Foreign:

Waterproofing Roofs

Bitumen (BUR)

Types 1, 2, 3 (awaiting TDS)

Felts (BUR)

Organic Felts
No. 15 Perforated Asphalt Felt (awaiting TDS)
No. 30 Asphalt Felt (awaiting TDS)
No. 40 Asphalt-Coated Base Sheet (awaiting TDS)
No. 50 Asphalt-Coated Base Sheet (awaiting TDS)
Glass-fibre Felts
Premium Type IV (awaiting TDS)
Premium Type VI (awaiting TDS)
Polyester Felts
Polymax 180 (awaiting TDS)
Polymax 250 (awaiting TDS)

BUR Membranes

Base Plies
Hal-Tex Scrim Kraft (awaiting TDS)
No. 28 Fibreglass Base Sheet (awaiting TDS)
Polymax 180 Base Ply (awaiting TDS)

BUR Systems

Polyester Felts, Buit-up Roof (4 diff. systems) (awaiting TDS)

Waterproofing Roofs

Insulation Overlay Panels

Asphaltic Overlays
Perma-Board (awaiting TDS)

SBS Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets
Therm-a-ply G100 FF (awaiting TDS)
Therm-a-ply G100 FR (awaiting TDS)
Therm-a-ply G100 FS (awaiting TDS)
Therm-a-ply G100 SS (awaiting TDS)
Therm-a-ply P180 FF (awaiting TDS)
Therm-a-ply P180 FS (awaiting TDS)
Therm-a-ply P180 SS (awaiting TDS)
Cap Sheets
Alumatac G100 AF (awaiting TDS)
Alumatac G100 AS (awaiting TDS)
Alumatac P180 AF (awaiting TDS)
Alumatac P180 AS (awaiting TDS)
Polymax 180 GS (awaiting TDS)
Therm-a-ply G100 GF (awaiting TDS)
Therm-a-ply G100 GS (awaiting TDS)
Therm-a-ply P180 GF (awaiting TDS)
Therm-a-ply P180 GS (awaiting TDS)
Therm-a-ply P250 GF (awaiting TDS)

Water-shedding Roofs

Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)

Mechanically Fastened Materials
Breathex

Underlayment/Eave Protection (ASM)

Self-adhered Materials
“Super” Tilemate G100 FW (awaiting TDS)

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=Manufacturers:HAL_Industries_Inc.&oldid=45697"