Division C - Accepted Materials
FleeceBACK RL (RapidLock) PVC
by Carlisle SynTec Systems Canada
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- http://www.carlislesyntec.com
- Accepted for the RoofStar Guarantee Program
- October 20, 2023
- Accepted for application in
- Roof Waterproofing Systems
- Acceptance Criteria
- N/A
- Product Summary
- Carlisle's RapidLock (RL) fleece-backed PVC membrane is internally reinforced and must be installed over their proprietary insulation panels, SecurShield RapidLock Polyiso and SecurShield RapidLock HD Polyiso. Both panels are manufactured with a VELCRO® Brand Securable Solutions facer on the upper side of the panel, to which the membrane is attached.
- Available thickness (nominal): 2.92 mm (115 mil)
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- Carlisle's RapidLock (RL) membranes (EPDM, TPO, and PVC) are accepted by the RGC for use on waterproofing roofs up to 30.48 m (100') above grade (higher roofs require a design review by Carlisle Syntec Systems Canada).
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
