(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Division C - Accepted Materials
SecurShield RapidLock (RL) HD Polyiso Insulation
by Carlisle SynTec Systems Canada
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- http://www.carlislesyntec.com
- Accepted for the RoofStar Guarantee Program
- October 20, 2023
- Accepted for application in
- Roof Waterproofing Systems
- Acceptance Criteria
- N/A
- Product Summary
- Carlisle's SecurShield RapidLock HD Polyiso is manufactured with a VELCRO® Brand Securable Solutions facer on the upper side of the panel, to which Carlisle's RapidLock membranes (EPDM, TPO, and PVC) may be attached. Note that this insulation panel is not suitable for use with any other membranes.
- (adapted from the Technical Data Sheet)
- Available panel dimensions: 1220 mm x 2440 mm (48" x 96")
- Available thicknesses: from 12.7 mm (1/2")
- Conditions and Limitations
- Carlisle's RapidLock (RL) membranes (EPDM, TPO, and PVC) are accepted by the RGC for use on waterproofing roofs up to 30.48 m (100') above grade (higher roofs require a design review by Carlisle Syntec Systems Canada).
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
