Materials:Elevate RubberGard MAX PT (Reinforced) EPDM Membrane

Jump to: navigation, search

Materials:Elevate RubberGard MAX PT (Reinforced) EPDM Membrane



Division C - Accepted Materials


Elevate RubberGard MAX PT (Reinforced) EPDM Membrane

Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Elevate Commercial Roofing Systems
Accepted for the RoofStar Guarantee Program
June 16, 2022
Accepted for application in
Roof Waterproofing Systems
Product Summary
Elevate RubberGard MAX PT (Reinforced) EPDM Membrane is manufactured with a factory-laminated 6" (152 mm) or 3″ (76 mm) wide QuickSeam™ tape extending continuously along one 100' (30.5 m) edge of the panel. The pre-applied tape extends slightly beyond the edge of the MAX PT membrane to form a selvage edge. (adapted from the Technical Data Sheet)
Conditions and Limitations
None
Click below for the Technical Data Sheet.
Technical Data Sheet

Back to Accepted Materials

Home