Materials:SKYWATER SOPRAFLOW CONTROL-Conventional Hybrid Roof

Jump to: navigation, search

Materials:SKYWATER SOPRAFLOW CONTROL-Conventional Hybrid Roof

Revision as of 17:17, 31 October 2024 by James Klassen (talk | contribs)



Division C - Accepted Materials
Group - Vegetated Roof Systems


SKYWATER® SOPRAFLOW CONTROL-Conventional Hybrid Roof
by Soprema Inc.

Material Acceptance and Product Details


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer
Soprema Inc.
Accepted for the RoofStar Guarantee Program
October 25, 2024
Accepted for application in
Vegetated Roof Systems
Acceptance Criteria
Refer to the RGC Standard for Vegetated Roofs
System Summary
SKYWATER® SOPRAFLOW CONTROL Hybrid Systems by SOPREMA® are a combination of blue roof and green roof. This assembly offers the manufacturer's best water retention capacity of the SKYWATER®systems available. Rainwater is retained both in the SOPRANATURE® vegetated roof and in the SOPRARETENTIO MODULE, which is located under the vegetated roof. This system makes it possible to reduce the volume of water as well as the flow discharged to the sewer, because of the use of the SOPRAFLOW CONTROL flow regulator..
Extensive VR System (sedum tile).jpg
Manufacturer Online Resource
SKYWATER SOPRAFLOW CONTROL-Conventional Hybrid Roof
System Depth
136.9 mm (5-3/8") 265.2 mm (14-3/8")
Growing Media Depth
76.3 mm (3") 304.8 mm (12") +
Vegetation Profile
Sedums, dry prairie grasses, dry flower meadows, and vegetation with a range of water needs, inclusive of urban agricultural crops (as specified by the Design Authority/Green Roof Design Professional. See Conditions and Limitations. Suitable vegetation depends on the selection of growing media).
Suitable climate zones
All BC zones, subject to manufacturer's approval
System Components
Sedum Mats by Soprema, or non-sedum mat supplied by others* (Click here for the Technical Data Sheet PDF)
'Sopraflor X, I, or AU growing media (Click [link here] for the Technical Data Sheet PDF)
Sopraretentio Mat (Click [link here] for the Technical Data Sheet PDF)
Soprafiltre (Click [link here] for the Technical Data Sheet PDF)
Sopraretentio Module (Click [link here] for the Technical Data Sheet PDF)
Sopradrain Eco-5 (Click [link here] for the Technical Data Sheet PDF)
Soprabarrier 30 (Click [link here] for the Technical Data Sheet PDF)
Soprema approved tape
Sopranature® metal edging
Sopranature® inspection chambers
*See Conditions and Limitations
Conditions and Limitations
Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.
Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.



Back to Accepted Materials

Home