ASM Eave and Rake Edges (Snap-Lock Seams)

(1) Ice Dam Protection: Accepted self-adhered modified bituminous membrane.

(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.

(3) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.

(4) Architectural Metal Roof Panel

(5) Continuous Metal Cleat

(6) Metal Fascia Flashing

(7) Edge Metal Flashing

(8) Preformed Closures

(9) Exposed Fasteners: High-domed gasketed cladding type screws compatible with metal roof panel.

(10) Rake Edge Metal Flashing

(A) Acceptable Deck

(B) Fascia Board

NOTE: Refer to RGC Guarantee Standards for additional requirements.]