ASM Eave and Rake Edges (Mechanical Seams)

(1) Ice Dam Protection: Accepted self-adhered modified bituminous membrane.

(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.

(3) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.

(4) Architectural Metal Roof Panel

(5) Continuous Metal Cleat

(6) Metal Fascia Flashing

(7) Continuous Edge Metal Flashing

(A) Acceptable Deck

(B) Wood Nailer

(C) Fascia Board

NOTE: Refer to RGC Guarantee Standards for additional requirements.