Asphalt Shingle System Details
Asphalt Shingle System Details
Revision as of 20:36, 19 July 2016 by James Klassen (talk | contribs)
The drawings contained within this section are intended to represent a variety of asphalt shingle applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.
For further information about asphalt shingle roof designs and requirements, see Asphalt Shingles Roof Systems.
- E2.7.1 Shingle Application - All Slopes
- E2.7.2 Low Slope Shingle Application
- E2.7.3 Open Valley
- E2.7.4 Closed Cut Valley
- E2.7.5 Woven Valley
- E2.7.6 Upper Junction Detail - Asphalt Shingle at BUR
- E2.7.7 Lower Junction Detail - Asphalt Shingle at BUR
- E2.7.8 Eave Detail - All Slopes
- E2.7.9 Chimney Flashing Detail
- E2.7.10 Lead Vent - Typical
- E2.7.11 Counter-flashing - Diverter Flashing
- E2.7.12 Integral Flashing with Capillary Table