Division C - Accepted Materials
Elevate CLAD-GARD SA Metal Underlayment
| Notice to the Reader:
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
Manufacturer and Acceptance
- Manufacturer
- Elevate Commercial Roofing Systems
- Accepted for the RoofStar Guarantee Program
- TBA
- Accepted for application in
- Water-shedding Roof Systems
- Product Summary
- Elevate CLAD-GARD SA Metal Underlayment consists of a Styrene-Butadiene-Styrene (SBS) rubber modified, self-adhesive asphalt blend with a woven slip resistant traction film on the top surface and an opaque release film on the bottom surface. CLAD-GARD SA Metal Underlayment is designed for use as an underlayment with UNA-CLAD™ metal roofing assemblies. CLAD-GARD SA underlayment is also suitable for use under mechanically attached tile and shingles. This underlayment reseals around nails in accordance with ASTM D 1970. (adapted from the Technical Data Sheet)
- Conditions and Limitations
- None
|
- Click below for the Technical Data Sheet.
Back to Accepted Materials
Home
