Division C - Accepted Materials
ULTRASeal SA HT
by KPNE Products Ltd.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- Name linked to website here
- Accepted for the RoofStar Guarantee Program
- June 13, 2024
- Accepted for application in
- Water-shedding Roof Systems
- Acceptance Criteria
- None
- Product Summary
- ULTRASeal SA-HT is a high-temperature rated butyl-based self-adhering underlayment accepted for use as eave or valley protection, or for flashing curbs or other details on water-shedding roofs. ULTRASeal SA-HT does not require priming before installation and is manufactured with a "walkable synthetic grip texture" on the top face that can remain exposed to ultraviolet light for up to nine (9) months.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- Accepted by the RGC for use as an underlayment, or as eave and valley protection, in all water-shedding roof systems:
- May be used in an asphalt shingle roof system, provided the slope is 1:3 (4" in 12") or greater;
- May be used in an architectural sheet metal (ASM) roof system, provided the slope is 1:6 (2" in 12") or greater.
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
