Division C - Accepted Materials
VMAX-201-MB Flat Roof Ventilator
by Ventilation Maximum Ltd.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- Ventilation Maximum Ltd.
- Accepted for the RoofStar Guarantee Program
- January 19, 2024
- Accepted for application in
- Waterproofing Roof Systems
- Acceptance Criteria
- None
- Product Summary
- The VMAX-201-MB is a static roof ventilator designed for installation on waterproofing roof systems. It is designed with a built-in storm-proof deflector system available in a variety of sizes and finish options. The VMAX-201-MB is designed to prevent the accumulation of moisture and hot air in an attic by creating a minimum evacuation rate of 351 CFM (model 201-12-MB) with wind speeds as low as 6 km/h (4 mph).
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- None (This product may be flashed into the roof field using materials and methods found in Part 12 of the applicable Standard (Division B))
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
