ASM Eave and Rake Edges (Mechanical Seams)

Jump to: navigation, search

ASM Eave and Rake Edges (Mechanical Seams)

Revision as of 18:37, 9 August 2016 by James Klassen (talk | contribs) (→‎WORK INCLUDED)

ASM 10.1.1 Eave and Rake Flashing (Mechanical Seam).jpg


1 WORK INCLUDED

(1) Ice and Water Protection
Accepted self-adhered modified bituminous membrane.
(2) Slip Sheet
Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
(3) Metal Panel Clip
Installed to metal roof panel manufacturer’s printed instructions.
(4) Architectural Metal Roof Panel
(5) Continuous Metal Cleat
(6) Metal Fascia Flashing
(7) Edge Metal Flashing (Continuous)

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Wood Nailer
(C) Fascia Board


NOTE: Refer to RoofStar Guarantee Standards for additional requirements.




Back to ASM Application

Back to ASM Construction Details

Back to Construction Details

Retrieved from "http://rpm.rcabc.org/index.php?title=ASM_Eave_and_Rake_Edges_(Mechanical_Seams)&oldid=7594"