Draft CD 9

Notice to Reader

Images used in a Construction Detail are representative and not intended in their representation of an assembly to be prescriptive. Nor are they necessarily drawn to scale. Rather, they are provided to visually convey the Standards, Guiding Principles and Recommendations of the RoofStar Guarantee Standards for a Waterproofing or Water-shedding System. Actual design with respect to dimensions, the selection of materials and their application remains the responsibility of the Design Authority. The full text of applicable RoofStar Guarantee Standards may be read by using the blue hyperlinks

SBS Details

Click below for a printable version of this page (N/A)

1 WORK INCLUDED

(1) Underlayment

The type of underlay required is determined by roof slope.

(2) Ventilation layer

Recommended over asphaltic underlays and / or as required in this Standard (see 8.1.2 Design).

(3) Architectural metal panel clip

(4) 'Z' Closure

Set in accepted sealant or butyl tape and secured with compatible non-corrosive flathead fasteners.

(5) Sealant

(6) Drag-load fasteners

Compatible non-corrosive fasteners.

(7) Architectural metal roof panel

Top end of panels must be "bread-panned".

(8) Ridge cap flashing

Cut away to reveal 'Z' closure and drag-load fasteners.

---

2 RELATED WORK BY OTHERS

(A) Acceptable Deck

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

---

RoofStar Guarantee Standards for Architectural Sheet Metal (ASM) Systems

Back to ASM Construction Details