Materials:Elevate RubberGard MAX PT (Reinforced) EPDM Membrane

Division C - Accepted Materials

Elevate RubberGard MAX PT (Reinforced) EPDM Membrane

Notice to the Reader: The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance Manufacturer Elevate Commercial Roofing Systems Accepted for the RoofStar Guarantee Program June 16, 2022 Accepted for application in Waterproofing Roof Systems Product Summary Elevate RubberGard MAX PT (Reinforced) EPDM Membrane is manufactured with a factory-laminated 6" (152 mm) or 3″ (76 mm) wide QuickSeam™ tape extending continuously along one 100' (30.5 m) edge of the panel. The pre-applied tape extends slightly beyond the edge of the MAX PT membrane to form a selvage edge. (adapted from the Technical Data Sheet) Conditions and Limitations None

Click below for the Technical Data Sheet.