Division C - Accepted Materials
Elevate ISOGARD HD Cover Board
| Notice to the Reader:
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
Manufacturer and Acceptance
- Manufacturer
- Elevate Commercial Roofing Systems
- Accepted for the RoofStar Guarantee Program
- April 2012
- Accepted for application in
- Waterproofing Roof Systems
- Product Summary
- Elevate Commercial Roofing Systems ISOGARD HD Cover Board is a half-inch (12.7 mm) thick polyiso insulation designed for use as a cover board. It is a high density, closed-cell, polyisocyanurate foam core that has been manufactured with a coated glass facer; the board provides the highest thermal performance when compared to other half-inch roof cover boards.
- All Elevate Commercial Roofing Systems polyisocyanurate insulations use EPA accepted blowing agents. Elevate Commercial Roofing Systems ISOGARD HD Cover Board with ISOGARD™ Foam Technology incorporates a HCFC-free blowing agent that does not contribute to the depletion of the ozone (ODP-free).
- Elevate Commercial Roofing Systems ISOGARD HD Cover Board can be applied over existing roof surfaces and under adhered or mechanically attached Single Ply, Cold and Modified Bitumen systems applied in Multi-Purpose MB Cold Adhesive and SA Base with a torch applied cap.
- Conditions and Limitations
- ISOGARD HD Cover Board may only be used with Elevate Commercial Roofing Systems.
|
- Click below for the Technical Data Sheet.
Back to Accepted Materials
Home
