Division C - Accepted Materials
Paradiene 30 FR SA
by Siplast, Inc.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- Siplast
- Accepted for the RoofStar Guarantee Program
- June 13, 2024
- Accepted for application in
- Waterproofing Roof Systems
Grade-level Waterproofing Systems
- Acceptance Criteria
- RGC ACWP-MOD (RGC ACCEPTANCE CRITERIA for MANUFACTURED POLYMER-MODIFIED, REINFORCED BITUMINOUS SHEET MEMBRANES Used in Roof Waterproofing and Grade-level Waterproofing Systems)
- Product Summary
- Paradiene 30 FR SA is a modified bitumen finish ply of the Siplast Self-Adhesive System, and consists of a lightweight random fibrous glass mat impregnated and coated with high-quality SBS-modified bitumen and surfaced with ceramic granules. The back surface of the sheet is coated with a self-adhesive SBS bitumen layer and is lined with a high-strength polyolefin released film.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- None
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
| Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes
Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified
bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.
The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).
Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.
|
Back to Accepted Materials
Home
