Division C - Accepted Materials
Polyboard 180 Combo
by Polyglass USA, Inc.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- Polyglass USA, Inc.
- Accepted for the RoofStar Guarantee Program
- January 19, 2024
- Accepted for application in
- Waterproofing Roof Systems
Grade-level Waterproofing Systems
Water-shedding Roof Systems
- Acceptance Criteria
- RGC ACWP-MOD (RGC ACCEPTANCE CRITERIA for MANUFACTURED POLYMER-MODIFIED, REINFORCED BITUMINOUS SHEET MEMBRANES Used in Roof Waterproofing and Grade-level Waterproofing Systems) (for membrane only)
- Product Summary
- Polyboard 180 Combo is an SBS polymer-modified polyester-reinforced base sheet factory-bonded to an asphaltic overlay board, manufactured with 4” lap extensions on one side and on one end. It is designed to provide a flame barrier over flame sensitive substrates for safer torch-welding of SBS cap sheets. The combination of membrane and asphaltic board makes application a one-step process. This product may be installed over wood, concrete, rigid insulation or as a recover sheet over an existing roof surface which is to be re-roofed. It is produced in sheets 36” wide by 60” long. It has a self-adhering 4” side lap and a self-adhering 4” end lap.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- None
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
