Division C - Accepted Materials
VMAX-AT2-1224-L/S Sloped Roof Air Intake Louvers
by Ventilation Maximum Ltd.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Manufacturer
- Ventilation Maximum Ltd.
- Accepted for the RoofStar Guarantee Program
- January 19, 2024
- Accepted for application in
- Water-shedding Roof Systems
- Acceptance Criteria
- None
- Product Summary
- The VMAX-AT2-1224-L/S models are triangular air intake louvers designed for water-shedding roof systems. These products have been designed specifically for buildings where fire code regulations are applied to prevent fire propagation to the attic via soffit air intakes, or when the presence of firewalls in an attic hinder the amount of air intake required for attic ventilation. It is also used in situations where soffits are non-existent or non-functional. Installed directly on the bottom of the roof above the eave and/or even with the fascia, these air intake louvers allow the supply of fresh air to circulate continuously in the attic to prevent the accumulation of heat and humidity.
- (adapted from the Technical Data Sheet)
- Conditions and Limitations
- None
- Technical Data Sheet
- Click the "PDF" icon to open the TDS in a new window.
|
Back to Accepted Materials
Home
