File list
File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 22:17, 20 February 2012 | 7.1.5.2.jpg (file) |  |
28 KB | 7.1.5.2 CLOSED CUT VALLEY | 1 |
| 22:17, 20 February 2012 | 7.1.5.10.jpg (file) |  |
56 KB | 7.1.5.10 INTEGRAL FLASHING - WITH CAPILLARY TAB FOR SHINGLED ROOF SYSTEMS | 1 |
| 22:11, 20 February 2012 | 7.1.4.1.1.jpg (file) |  |
39 KB | 7.1.4.1 LOW SLOPE ASPHALT SHINGLE APPLICATION | 1 |
| 22:11, 20 February 2012 | 7.1.2.1.1.jpg (file) |  |
39 KB | 7.1.2.1 STANDARD OR STEEP SLOPE ASPHALT SHINGLE APPLICATION | 1 |
| 22:03, 20 February 2012 | 6.3.7.1.jpg (file) |  |
43 KB | 6.3.7 SINGLE PLY MEMBRANE MECHANICAL CURB OPENING | 1 |
| 22:03, 20 February 2012 | 6.3.6.1.jpg (file) |  |
28 KB | 1 | |
| 22:03, 20 February 2012 | 6.3.5.1.jpg (file) |  |
32 KB | 6.3.5 SINGLE PLY MEMBRANE CLAMPING COPPER DRAIN | 1 |
| 22:03, 20 February 2012 | 6.3.4.1.jpg (file) |  |
27 KB | 6.3.4 SINGLE PLY MEMBRANE: CURB OPENING | 1 |
| 22:02, 20 February 2012 | 6.3.3.1.jpg (file) |  |
60 KB | SINGLE PLY MEMBRANE: BALLASTED PROTECTED MEMBRANE | 1 |
| 21:36, 20 February 2012 | 6.3.2.1.jpg (file) |  |
32 KB | SINGLE PLY MEMBRANE: FULLY ADHERED | 1 |
| 21:36, 20 February 2012 | 6.3.1.1.jpg (file) |  |
29 KB | SINGLE PLY MEMBRANE: MECHANICALLY ATTACHED GENERIC CONVENTIONAL ASSEMBLY | 1 |
| 21:31, 20 February 2012 | 5.5.8.1.jpg (file) |  |
32 KB | MODIFIED BITUMINOUS MEMBRANE: PRE-CURB PLANTER WALL | 1 |
| 21:31, 20 February 2012 | 5.5.7.1.jpg (file) |  |
46 KB | MODIFIED BITUMINOUS MEMBRANE: MECHANICAL CURB OPENING | 1 |
| 21:31, 20 February 2012 | 5.5.6.1.jpg (file) |  |
46 KB | MODIFIED BITUMINOUS MEMBRANE: TWO PART CABLE FLASHING | 1 |
| 21:31, 20 February 2012 | 5.5.5.1.jpg (file) |  |
44 KB | MODIFIED BITUMINOUS MEMBRANE: CLAMPING COPPER DRAIN | 1 |
| 20:59, 20 February 2012 | 5.5.4.1.jpg (file) |  |
45 KB | MODIFIED BITUMINOUS MEMBRANE: CURB OPENING | 1 |
| 20:59, 20 February 2012 | 5.5.3.1.jpg (file) |  |
55 KB | MODIFIED BITUMINOUS MEMBRANE: PROTECTED MEMBRANE | 1 |
| 20:51, 20 February 2012 | 5.1.2.1.jpg (file) |  |
25 KB | Protectoboard | 1 |
| 20:51, 20 February 2012 | 5.1.1.5.jpg (file) |  |
28 KB | Garden Non-Insulated Concrete Deck | 1 |
| 20:51, 20 February 2012 | 5.1.1.4.jpg (file) |  |
40 KB | Sloped and Barrel Non Insulated Wood Deck | 1 |
| 20:50, 20 February 2012 | 5.1.1.3.jpg (file) |  |
26 KB | 1 | |
| 20:50, 20 February 2012 | 5.1.1.2.jpg (file) |  |
28 KB | 1 | |
| 20:49, 20 February 2012 | 5.1.1.1.jpg (file) |  |
35 KB | 1 | |
| 20:48, 20 February 2012 | 4generaldiagram.jpg (file) |  |
31 KB | 1 | |
| 20:48, 20 February 2012 | 458.jpg (file) |  |
42 KB | 1 | |
| 20:48, 20 February 2012 | 459.jpg (file) |  |
30 KB | 1 | |
| 20:47, 20 February 2012 | 4511.jpg (file) |  |
41 KB | 1 | |
| 20:47, 20 February 2012 | 4512.jpg (file) |  |
38 KB | 1 | |
| 20:47, 20 February 2012 | 4510.jpg (file) |  |
45 KB | 1 | |
| 20:45, 20 February 2012 | 453.jpg (file) |  |
34 KB | 1 | |
| 20:45, 20 February 2012 | 454.jpg (file) |  |
38 KB | 1 | |
| 20:45, 20 February 2012 | 455.jpg (file) |  |
33 KB | 1 | |
| 20:45, 20 February 2012 | 456.jpg (file) |  |
38 KB | 1 | |
| 20:45, 20 February 2012 | 457.jpg (file) |  |
36 KB | 1 | |
| 20:39, 20 February 2012 | 11.1.5.2.jpg (file) |  |
88 KB | R.I.E.I. Semi-annual Maintenance Inspection Checklist Page 2 | 1 |
| 20:39, 20 February 2012 | 11.1.5.1.jpg (file) |  |
82 KB | R.I.E.I. Semi-annual Maintenance Inspection Checklist Page 1 | 1 |
| 20:39, 20 February 2012 | 11.1.3.5.9.jpg (file) |  |
19 KB | Interior moisture vapour migrating to the cool underside of the membrane, condensing, then being absorbed by the organic fibres of the felt which swell into a ridge over each joint of insulation in “picture frame” pattern. | 1 |
| 20:38, 20 February 2012 | 11.1.3.5.8.gif (file) |  |
12 KB | AREA DIVIDER | 1 |
| 20:38, 20 February 2012 | 11.1.3.5.7.jpg (file) |  |
23 KB | Stress from contraction of the membrane in an area where the membrane or a component of the roofing system is poorly attached. This can occur between: deck and insulation, layers of insulation, or built-up roofing membrane and insulation. | 1 |
| 20:38, 20 February 2012 | 11.1.3.5.6.jpg (file) |  |
27 KB | Stress from differential movement or cracking of the supporting structural deck or substrate, which can occur where deck changes direction, where two types of deck are installed adjacent to each other, or where built-up roofing is solidly cemented to a de | 1 |
| 20:37, 20 February 2012 | 11.1.3.5.5.jpg (file) |  |
33 KB | Complete the repair following the basic repair procedures presented previously. | 1 |
| 20:37, 20 February 2012 | 11.1.3.5.4.jpg (file) |  |
19 KB | Trowel mastic smoothly over patch or leave area slightly raised. | 1 |
| 20:36, 20 February 2012 | 11.1.3.5.3.jpg (file) |  |
23 KB | Fill depression to level of surface of roof membrane using fitted felts adhered with bituminous mastic. | 1 |
| 20:36, 20 February 2012 | 11.1.3.5.2.jpg (file) |  |
19 KB | Remove entire blister to point at edges where remaining felts are well-adhered | 1 |
| 20:36, 20 February 2012 | 11.1.3.5.13.jpg (file) |  |
60 KB | Construct deck mounted curb so deck and base flashing move together. | 1 |
| 20:35, 20 February 2012 | 11.1.3.5.12.jpg (file) |  |
19 KB | Membrane Slippage Repair | 1 |
| 20:35, 20 February 2012 | 11.1.3.5.11.jpg (file) |  |
15 KB | Fishmouthing or Loose Felt Laps - (Bituminous Systems) | 1 |
| 20:28, 20 February 2012 | 11.1.3.5.10.jpg (file) |  |
21 KB | Interior moisture vapour migrating to the cool underside of the membrane, condensing, then being absorbed by the organic fibres of the felt which swell into a ridge over each joint of insulation in “picture frame” pattern. | 1 |
| 20:27, 20 February 2012 | 11.1.3.5.1.jpg (file) |  |
19 KB | Surface Slippage Flow of Bitumen and Aggregate | 1 |
| 20:23, 20 February 2012 | 11.1.3.4.5.jpg (file) |  |
28 KB | Sprayed-on Polyurethane (and coating system) - Basic Repair Technique | 1 |
