Manufacturers:Precision Metals Ltd.

Division C - Accepted Materials

---

Precision Metals Ltd.
Associate Member (Manufacturer)

Manufacturer InformationMaterials for Waterproofing RoofsMaterials for Waterproofing at GradeMaterials for Water-Shedding Roofs

Materials Listed by Category The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website https://precisionmetals.ca/ Contact Address See the current Membership list and contact information at www.rcabc.org Country of Origin Canada Country of Manufacture Canada Year First Installed pre-2017 BC: pre-2017 Canada: pre-2017 Foreign: N/A

---

Drains

External flange-type roof drains

Copper Hot-welded Drain

Internal flange-type roof drains

Spun Copper Drain

Spun Aluminum Drain

Spun Copper Drain (Clamping)

Spun Aluminum Drain (Clamping)

Scupper and Overflow Drains

Copper Scupper (Open top)

Copper 2 Piece Scupper - Clamping

Copper 2 Piece Scupper

---

Roof Penetration Flashings

Galvanized Penetration Flashings

Hot-welded B-vent (Flat)

Aluminium and Copper Penetration Flashings

Aluminum Stack (Pipe flashing)

Aluminum Stack Cap (Standard)

Aluminum Stack Cap (Anti-vandal)

---

Exhaust and Intake Vents

Galvanized Vents

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

BUR Vent

Flat Roof Dryer Vent

Flat Top BUR Vent

Insulated Aluminum Stack

---

---

Drains

Deck Drains (not for roofs^*)

Spun Aluminum Deck Drain

Spun Copper Deck Drain

Scupper and Overflow Drains

Copper 2 Piece Scupper - Clamping

Copper 2 Piece Scupper

---

Penetration Flashings

Galvanized Penetration Flashings

Hot-welded B-vent (Flat)

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

Aluminium and Copper Penetration Flashings

Aluminum Stack (Pipe flashing)

Aluminum Stack Cap (Standard)

Aluminum Stack Cap (Anti-vandal)

---

Exhaust and Intake Vents

Galvanized Vents

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

Flat Roof Dryer Vent

Flat Top BUR Vent

Insulated Aluminum Stack

---

^* Refer to roof Standards for restrictions on drain types

---

Metal Roofing

NewTech FF 100 Metal Panel

NewTech SS 100 Metal Panel

---

Drains

Scupper and Overflow Drains

Copper 2 Piece Scupper - Clamping

Copper 2 Piece Scupper

Roof Penetration Flashings

Galvanized Penetration Flashings

Hot-welded B-vent (Sloped)

Aluminium and Copper Penetration Flashings

Aluminum Stack Flashing (Sloped)

Aluminum Stack Cap (Standard)

Aluminum Stack Cap (Anti-vandal)

---

Exhaust and Intake Vents

Galvanized Vents

Gooseneck Vent

PRT Bath/Dryer/Stove Vent

Flat Roof Dryer Vent

Flat Top BUR Vent

B-Vent Flashing (soldered)

Panel Vent

Slantback Vent

Intake Panel Vent

---

---

Home

© RCABC 2026
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Accept Terms Of Use

We use cookies to enhance your browsing experience and analyze website traffic. By clicking "Agree" or continuing to browse our website, you consent to the use of cookies and agree to the Roofing Practices Manual Terms Of Use.

Agree